{"title":"Console Power Solutions","description":"\u003cp\u003eUSB-C power for home consoles: adapters and cables for consoles with an external power brick, internal USB-C power supply boards for consoles with a built-in supply, and the chargers and tools to run them.\u003c\/p\u003e","products":[{"product_id":"n64-pow","title":"Nintendo 64 USB-C Power Supply (N64 Pow) — 12V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern USB-C replacement for the Nintendo 64's original power supply. The stock brick is heavy, bulky and increasingly prone to failure with age. The N64 Pow slots into the back of the console in its place and runs it from a USB-C Power Delivery charger instead — around 90% smaller and 80% lighter than the original, and sitting flush with the back of the console.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits Every Nintendo 64\u003c\/h3\u003e\n\u003cp\u003eWorks with both \u003cstrong\u003eNTSC\u003c\/strong\u003e and \u003cstrong\u003ePAL\u003c\/strong\u003e consoles, slotting into the power bay at the back of the console in place of the original supply.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe N64 Pow draws \u003cstrong\u003e12 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — standard 5 V phone chargers and non-PD chargers will not work, and can leave the console unstable or unable to boot. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; the 270 W supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFar smaller and lighter\u003c\/strong\u003e — around 90% smaller and 80% lighter than the original brick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection\u003c\/strong\u003e against over-voltage, over-current, short circuits and overheating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne charger for several consoles\u003c\/strong\u003e if you have more than one system converted to USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery (PD 3.0), 12 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Nintendo 64, NTSC and PAL, in place of the original power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC to the console — the USB-C port is a power input, not a data or charging port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eNone required — no tools and no opening the console. The N64 Pow slots into the back of the console in place of the original power brick.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne N64 Pow power supply. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what it needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49195569447129,"sku":"RC-PSU-N64-POW","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/ChatGPTImageSep6_2026_09_22_17PM_2.png?v=1788700980"},{"product_id":"200w-3c-3a-port-gan-usb-c-charger","title":"200W 3C+3A Port GaN USB-C Charger","description":"\u003cp\u003eOne compact brick to power your retro shelf. Six ports and 200 W of total output let you run several USB-C console adapters from a single wall socket, instead of cluttering a power board with individual bricks.\u003c\/p\u003e\n\u003ch3\u003eConsole Compatibility\u003c\/h3\u003e\n\u003cp\u003eEvery console power product we stock needs one of three USB-C PD profiles. Here is where this charger supplies each one:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V\u003c\/strong\u003e — the 9 V cable and adapter versions: \u003cstrong\u003ePD1, PD2 and PD3\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V \/ 3 A\u003c\/strong\u003e — the GameCube and Wii versions, the Saturn, Dreamcast, PlayStation 1 and GameCube boards, and the N64 Pow: \u003cstrong\u003ePD1 only\u003c\/strong\u003e (PD2 and PD3 top out at 12 V \/ 2.5 A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 V \/ 3 A\u003c\/strong\u003e — the Wii U version and the PlayStation 2 board: \u003cstrong\u003ePD1 only\u003c\/strong\u003e (PD2 and PD3 top out at 15 V \/ 2 A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A ports\u003c\/strong\u003e — QC1 to QC3 are Quick Charge ports for accessories and lighting, not for USB-C PD console adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e reserve PD1 for your 12 V and 15 V adapters, as it is the only port that supplies them at a full 3 A. PD2 and PD3 are ideal for the 9 V leads for the NES, SNES, Mega Drive and PC Engine.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 W total output\u003c\/strong\u003e across six ports\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSix ports — three USB-C PD plus three USB-A Quick Charge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e12 V \/ 3 A and 15 V \/ 3 A on PD1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 W\u003c\/strong\u003e from PD1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGaN semiconductor technology\u003c\/strong\u003e — higher efficiency, less heat and a smaller body than a conventional charger of the same output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAustralian plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE and UL certified\u003c\/strong\u003e, with protection against over-current, overheating and short circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOutput Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePD1:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/5A — 100 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePD2 \/ PD3:\u003c\/strong\u003e 5V\/3A · 9V\/3A · 12V\/2.5A · 15V\/2A · 20V\/1.5A — 30 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQC1 \/ QC2 \/ QC3:\u003c\/strong\u003e 5V\/3A · 9V\/2A · 12V\/1.5A — 18 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared output:\u003c\/strong\u003e PD1 + PD2 together deliver 45 W + 30 W; PD3 alongside the QC ports delivers 5 V \/ 3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal output:\u003c\/strong\u003e up to 200 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy GaN?\u003c\/h3\u003e\n\u003cp\u003eGallium nitride switches far more efficiently than the silicon used in older chargers, so it wastes less energy as heat. That efficiency is what makes this much output possible from a compact unit — and it keeps the charger cool while it works.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eThe headline 200 W is the peak capability; with several ports in use the combined output is shared between them. Every console power adapter has its own voltage and current requirement — check that yours is met by the port you plug it into. Not sure what a port can deliver? Our USB-C PD power meter reads the real figures back. Sold as a single charger; USB-C cables are not included.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49243875737817,"sku":"RC-CHG-200W","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/brave_TUmJo7HNbi.png?v=1789477219"},{"product_id":"270w-4c-2a-port-gan-usb-c-charger","title":"270W 4C+2A Port GaN USB-C Charger","description":"\u003cp\u003eA desktop power station for the retro shelf. Four USB-C Power Delivery ports, two USB-A ports and 270 W of total output on one compact unit — and every USB-C port supplies the 12 V \/ 3 A profile that USB-C console adapters are built around.\u003c\/p\u003e\n\u003ch3\u003eConsole Compatibility\u003c\/h3\u003e\n\u003cp\u003eEvery console power product we stock needs one of three USB-C PD profiles. Here is where this charger supplies each one:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V\u003c\/strong\u003e — the 9 V cable and adapter versions: \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V \/ 3 A\u003c\/strong\u003e — the GameCube and Wii versions, the Saturn, Dreamcast, PlayStation 1 and GameCube boards, and the N64 Pow: \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 V \/ 3 A\u003c\/strong\u003e — the Wii U version and the PlayStation 2 board: \u003cstrong\u003eUSB-C1, C2 and C3\u003c\/strong\u003e (C4 tops out at 15 V \/ 2 A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A ports\u003c\/strong\u003e — A1 and A2 are 5 V only, for accessories and lighting, not for USB-C PD console adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e C4 is the natural home for a 9 V lead, leaving C1 to C3 free for anything needing 15 V.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e270 W total output\u003c\/strong\u003e across six ports\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSix ports — four USB-C PD plus two USB-A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V \/ 3 A on every USB-C port\u003c\/strong\u003e, and 15 V \/ 3 A on C1 to C3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 W\u003c\/strong\u003e from USB-C1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGaN semiconductor technology\u003c\/strong\u003e — higher efficiency, less heat and a smaller body than a conventional charger of the same output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAustralian plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCE, FCC and RoHS certified\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOutput Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C1:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/5A — 100 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C2:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/3.25A — 65 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C3:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/2.25A — 45 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C4:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · 15V\/2A · 20V\/1.5A — 30 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A1 \/ USB-A2:\u003c\/strong\u003e 5V\/3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared output:\u003c\/strong\u003e with everything connected, 65 W + 45 W + 45 W + 30 W + 15 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal output:\u003c\/strong\u003e up to 270 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy GaN?\u003c\/h3\u003e\n\u003cp\u003eGallium nitride switches far more efficiently than the silicon used in older chargers, so it wastes less energy as heat. That efficiency is what makes this much output possible from a compact unit — and it keeps the charger cool while it works.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eThe headline 270 W is the peak capability; with several ports in use the combined output is shared between them. Every console power adapter has its own voltage and current requirement — check that yours is met by the port you plug it into. Not sure what a port can deliver? Our USB-C PD power meter reads the real figures back. Sold as a single charger; USB-C cables are not included.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49244370862297,"sku":"RC-CHG-270W","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/270wcharger.png?v=1789477560"},{"product_id":"sega-saturn-usb-c-power-supply-board","title":"Sega Saturn USB-C Power Supply Board — 12V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern replacement for the internal power supply in a Sega Saturn. The original PSU is now well past its design life — ageing capacitors, heat and mains-side wear are among the most common causes of a Saturn that has stopped powering on, or that behaves unpredictably once it warms up. This board replaces it outright and runs the console from a USB-C Power Delivery charger instead.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits The Sega Saturn\u003c\/h3\u003e\n\u003cp\u003eA direct replacement for the original power supply unit, matching its electrical specification and physical footprint.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe board draws \u003cstrong\u003e12 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — plenty of otherwise-capable USB-C chargers skip 12 V altogether, or offer it only at reduced current. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; the 270 W supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, regulated output\u003c\/strong\u003e — a consistent supply without the voltage sag behind crashes and spontaneous resets on a tired PSU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns cooler\u003c\/strong\u003e than the original supply, removing a real heat source from inside the console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes the mains-side components out\u003c\/strong\u003e of the console entirely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 12 V \/ 3 A DC, regulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery, 12 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Sega Saturn, in place of the internal power supply unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC — no USB data or charging functionality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard size:\u003c\/strong\u003e approximately 12 × 8 × 4 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 52 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is an internal replacement, so fitting it means opening the console and removing the original power supply. It is a straightforward swap for anyone comfortable working inside a retro console, and no modification to the motherboard is required.\u003c\/p\u003e\n\u003cdiv class=\"rc-callout\"\u003e\n\u003cspan class=\"rc-callout__title\"\u003ePrefer it fitted for you?\u003c\/span\u003e\n\u003cp\u003eRetro Craft can install this board for you. Send your console to us from anywhere in Australia, or drop it in if you are local to Perth, and it comes back tested and ready to play. \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e before ordering and we will sort out the details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne power supply board. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what this board needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49246497046745,"sku":"RC-PSU-SATURN","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/SSUSBCPSU2.png?v=1789570682"},{"product_id":"sega-dreamcast-usb-c-power-supply-board","title":"Sega Dreamcast USB-C Power Supply Board — 12V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern replacement for the internal power supply in a Sega Dreamcast. The original PSU is one of the console's known weak points — it runs hot, sits directly beneath the GD-ROM drive, and after 25 years its ageing capacitors are a common cause of a Dreamcast that refuses to power on, resets under load, or gets unreliable once it warms up. This board replaces it outright and runs the console from a USB-C Power Delivery charger instead.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits The Sega Dreamcast\u003c\/h3\u003e\n\u003cp\u003eA direct replacement for the original power supply unit, shaped to sit where it does and connect to the console's existing power connector.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe board draws \u003cstrong\u003e12 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — plenty of otherwise-capable USB-C chargers skip 12 V altogether, or offer it only at reduced current. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; the 270 W supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, regulated output\u003c\/strong\u003e — a consistent 12 V \/ 3 A, without the voltage sag behind crashes and spontaneous resets on a tired PSU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns far cooler\u003c\/strong\u003e than the original supply, removing a significant heat source from a console well known for running hot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes the mains-side components out\u003c\/strong\u003e of the console entirely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 12 V \/ 3 A DC, regulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery, 12 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Sega Dreamcast, in place of the original power supply unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC — the USB-C port is a power input, not a data or charging port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eA drop-in replacement: the board is shaped to sit where the original supply does and connects to the console's existing power connector, with no soldering and no modification to the motherboard. Fitting it does mean opening the console and removing the old unit.\u003c\/p\u003e\n\u003cdiv class=\"rc-callout\"\u003e\n\u003cspan class=\"rc-callout__title\"\u003ePrefer it fitted for you?\u003c\/span\u003e\n\u003cp\u003eRetro Craft can install this board for you. Send your console to us from anywhere in Australia, or drop it in if you are local to Perth, and it comes back tested and ready to play. \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e before ordering and we will sort out the details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne power supply board. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what this board needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49246513168601,"sku":"RC-PSU-DC","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/DCUSBCPSU2.png?v=1789570966"},{"product_id":"sony-playstation-1-fat-usb-c-power-supply-board","title":"Sony PlayStation 1 (Fat) USB-C Power Supply Board — 12V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern replacement for the internal power supply in an original PlayStation 1. The stock PSU is a substantial mains unit that sits inside the console generating heat, and after 25-odd years its ageing capacitors are a common cause of a PS1 that will not power on, resets during play, or turns temperamental once it warms up. This board replaces it outright and runs the console from a USB-C Power Delivery charger instead.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits The Original “Fat” PlayStation — Not The PSone\u003c\/h3\u003e\n\u003cp\u003eThis board is made for the full-size original PlayStation, the model with the internal mains power supply. The later slimline \u003cstrong\u003ePSone\u003c\/strong\u003e uses an external power brick and a completely different arrangement, so this is not the part for that console — for a PSone, our USB-C power cable covers it. If you are unsure which model you have, the original is the large squared-off unit with a mains cable going straight into the back.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe board draws \u003cstrong\u003e12 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — plenty of otherwise-capable USB-C chargers skip 12 V altogether, or offer it only at reduced current. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; the 270 W supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, regulated output\u003c\/strong\u003e — a consistent supply without the voltage sag behind crashes and spontaneous resets on a tired PSU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns cooler\u003c\/strong\u003e than the original supply, removing a real heat source from inside the console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes the mains-side components out\u003c\/strong\u003e of the console entirely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 12 V \/ 3 A DC, regulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery, 12 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e original PlayStation 1 (Fat), in place of the internal power supply unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC — the USB-C port is a power input, not a data or charging port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is an internal replacement, so fitting it means opening the console and removing the original power supply. The board is shaped to sit where it does and connects to the console's existing power connector, with no modification to the motherboard.\u003c\/p\u003e\n\u003cdiv class=\"rc-callout\"\u003e\n\u003cspan class=\"rc-callout__title\"\u003ePrefer it fitted for you?\u003c\/span\u003e\n\u003cp\u003eRetro Craft can install this board for you. Send your console to us from anywhere in Australia, or drop it in if you are local to Perth, and it comes back tested and ready to play. \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e before ordering and we will sort out the details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne power supply board. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what this board needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49246516379865,"sku":"RC-PSU-PS1FAT","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/PS1USBCPSU2.png?v=1789571554"},{"product_id":"nintendo-gamecube-usb-c-power-supply-board","title":"Nintendo GameCube USB-C Power Supply Board — 12V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern USB-C Power Delivery replacement for the Nintendo GameCube's original power supply. The stock unit is a large, heavy brick that is increasingly hard to find in good condition — and like every supply of its age, its capacitors do not last forever. This board takes its place and runs the console from a USB-C PD charger instead, which is a great deal easier to live with, to travel with, and to replace.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits Both GameCube Revisions\u003c\/h3\u003e\n\u003cp\u003eCompatible with \u003cstrong\u003eDOL-001\u003c\/strong\u003e (the original model, with the digital AV output) and \u003cstrong\u003eDOL-101\u003c\/strong\u003e (the later revision without it). A direct-fit replacement requiring no modification to the console.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe board draws \u003cstrong\u003e12 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — plenty of otherwise-capable USB-C chargers skip 12 V altogether, or offer it only at reduced current. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; the 270 W supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, regulated output\u003c\/strong\u003e — a consistent 12 V \/ 3 A, without the voltage sag behind crashes and spontaneous resets on a tired supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFar less to carry and store\u003c\/strong\u003e than the original brick, which is among the bulkiest of its console generation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf, instead of hunting down a 20-year-old original\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne charger for several consoles\u003c\/strong\u003e if you have more than one system converted to USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 12 V \/ 3 A DC, regulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery, 12 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Nintendo GameCube DOL-001 and DOL-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC — the USB-C port is a power input, not a data or charging port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe board takes the place of the console's original power supply and requires no modification to the motherboard.\u003c\/p\u003e\n\u003cdiv class=\"rc-callout\"\u003e\n\u003cspan class=\"rc-callout__title\"\u003ePrefer it fitted for you?\u003c\/span\u003e\n\u003cp\u003eRetro Craft can install this board for you. Send your console to us from anywhere in Australia, or drop it in if you are local to Perth, and it comes back tested and ready to play. \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e before ordering and we will sort out the details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne power supply board. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what this board needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49246517952729,"sku":"RC-PSU-GC","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/NGCUSBCPSU1.png?v=1789571927"},{"product_id":"usb-c-power-cable-retro-consoles","title":"USB-C Power Cable for Retro Consoles — 1.8 m","description":"\u003cp\u003eOne USB-C Power Delivery lead, in five versions — so a shelf of retro hardware can run from a single modern charger instead of a drawer full of ageing power bricks. Choose the version that matches your console from the list above.\u003c\/p\u003e\n\u003ch3\u003eWhich Version Do I Need?\u003c\/h3\u003e\n\u003cp\u003ePick by the connector your console takes. If you are powering several systems, add one of each — select a version, set the quantity, add it to your cart, then come back and choose the next. Or take a single cable and move it between consoles as you play.\u003c\/p\u003e\n\u003ch4\u003e5.5 × 2.1 mm, centre positive — 9 V\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNintendo:\u003c\/strong\u003e NES Frontloader \u003cem\u003e(NA\/USA)\u003c\/em\u003e, NES Toploader \u003cem\u003e(NA\/USA)\u003c\/em\u003e, Famicom, AV Famicom, Famicom Disk System, Super Famicom \u003cem\u003e(Japan)\u003c\/em\u003e, Super Famicom Jr. \u003cem\u003e(Japan)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSega:\u003c\/strong\u003e Master System, Genesis Model 1 \/ Mega Drive Model 1, Sega CD \u003cem\u003e(Model 1 and 2)\u003c\/em\u003e, Game Gear \u003cem\u003e(PAL and Japan)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEC:\u003c\/strong\u003e PC Engine, PC Engine CoreGrafx, PC Engine Shuttle, TurboGrafx-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtari:\u003c\/strong\u003e Jaguar, Jaguar CD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e4.75 × 1.7 mm, centre positive — 9 V\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSega:\u003c\/strong\u003e Mega Drive Model 2, Genesis Model 2, Genesis Model 3, 32X, Game Gear \u003cem\u003e(USA)\u003c\/em\u003e, Nomad, JVC X’eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEC:\u003c\/strong\u003e PC Engine Duo-R, PC Engine Duo-RX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSony:\u003c\/strong\u003e PS One \u003cem\u003e(the small redesign, SCPH-1xx)\u003c\/em\u003e, PlayStation 2 Slim \u003cem\u003e(SCPH-7xxxx)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNintendo GameCube — 12 V\u003c\/h4\u003e\n\u003cp\u003eFits DOL-001 and DOL-101.\u003c\/p\u003e\n\u003ch4\u003eNintendo Wii — 12 V\u003c\/h4\u003e\n\u003cp\u003ePowers the console itself; it is not a charger for controllers or accessories.\u003c\/p\u003e\n\u003ch4\u003eNintendo Wii U — 15 V\u003c\/h4\u003e\n\u003cp\u003ePowers the console itself. The GamePad has its own separate charger and is not covered by this lead.\u003c\/p\u003e\n\u003ch3\u003eChoosing A Charger\u003c\/h3\u003e\n\u003cp\u003eEach version asks its charger for a different profile, and this is the specification to check before ordering. Total wattage on the box is not the measure — plenty of high-output chargers skip 12 V entirely, or offer it only at reduced current.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V versions:\u003c\/strong\u003e any USB-C PD charger offering a 9 V profile. All three of our chargers do, on their USB-C ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V versions:\u003c\/strong\u003e needs 12 V at 3 A. On the 200 W six-port charger that is \u003cstrong\u003ePD1\u003c\/strong\u003e only; the 270 W charger supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 V version (Wii U):\u003c\/strong\u003e needs 15 V at 3 A. Use \u003cstrong\u003ePD1\u003c\/strong\u003e on the 200 W charger, or \u003cstrong\u003eUSB-C1, C2 or C3\u003c\/strong\u003e on the 270 W charger, or \u003cstrong\u003eany USB-C port\u003c\/strong\u003e on the 1000 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulated output\u003c\/strong\u003e for consistent performance, without the voltage sag of a tired original adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.8 m lead\u003c\/strong\u003e — enough slack to reach a charger behind or beside the cabinet, rather than tethering the console to the nearest outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne charger for the whole shelf\u003c\/strong\u003e, alongside our USB-C console power boards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and portable\u003c\/strong\u003e, and far easier to travel with than a period power brick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard USB-C PD input\u003c\/strong\u003e, so it also runs from a suitably capable USB-C power bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eConsoles with a \u003cstrong\u003ebuilt-in mains power supply\u003c\/strong\u003e cannot use a DC lead of any kind — that includes the original full-size PlayStation, the PlayStation 2 (Fat), the Saturn and the Dreamcast. For those we stock internal USB-C power supply boards instead.\u003c\/p\u003e\n\u003cp\u003eRegional versions sometimes differ in their power requirements — note that the Game Gear appears under two different versions depending on where it was sold. If your console is not listed, or you are unsure which revision you have, get in touch before ordering and we will check it with you. A USB-C charger is not included; see Power Solutions and Adapters.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"5.5 × 2.1 mm centre positive (9V)","offer_id":49247094243545,"sku":"RC-CBL-USBC-5521-9V","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"4.75 × 1.7 mm centre positive (9V)","offer_id":49247094276313,"sku":"RC-CBL-USBC-4717-9V","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo GameCube (12V)","offer_id":49247094309081,"sku":"RC-CBL-USBC-GC-12V","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo Wii (12V)","offer_id":49247094341849,"sku":"RC-CBL-USBC-WII-12V","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo Wii U (15V)","offer_id":49247094374617,"sku":"RC-CBL-USBC-WIIU-15V","price":17.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/USB-CPDCable.png?v=1789469914"},{"product_id":"usb-c-pd-power-meter-voltage-current-tester","title":"USB-C PD Power Meter — Voltage, Current \u0026 Protocol Tester (PD3.1, PPS, QC)","description":"\u003cp\u003eMany people already own a USB-C charger that could power a retro console — a laptop charger, a desktop power station, a spare left over from an old device. The question is whether it actually supplies the voltage and current your console needs, and that is rarely clear from the box.\u003c\/p\u003e\n\u003cp\u003eThis meter answers it. Plug it in between the charger and your console's USB-C adapter or cable, and it shows exactly what the charger is delivering — before you trust it with the console.\u003c\/p\u003e\n\u003ch3\u003eWhy It Matters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToo little voltage or current\u003c\/strong\u003e — an undervolted console is an unstable one: crashes, resets, glitching, or refusing to start at all. Plenty of capable chargers skip the 12 V profile entirely, or offer it at reduced current on some of their ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToo much voltage\u003c\/strong\u003e — a charger that does not behave the way its label claims can supply more than the console is designed for, and that risks permanent damage. Checking first costs nothing; replacing a thirty-year-old console is another matter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck The Label First\u003c\/h3\u003e\n\u003cp\u003eA well-labelled charger lists each port separately, something like:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC1 or C2:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · 15V\/3A · 20V\/5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC3:\u003c\/strong\u003e 5V\/3A · 9V\/2.22A · 12V\/1.5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn that charger, C1 and C2 would run a 12 V \/ 3 A console adapter and C3 would not — despite all three being USB-C ports on the same unit. Where the label is vague, worn off, or quotes only a total wattage, the meter gives you the real figures instead.\u003c\/p\u003e\n\u003ch3\u003eWhat It Shows\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive voltage, current and power\u003c\/strong\u003e on a clear digital display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak readings\u003c\/strong\u003e — the highest voltage, current and power seen, so a brief spike cannot slip past unnoticed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy delivered\u003c\/strong\u003e in mAh and mWh, with an elapsed-time counter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInternal temperature\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProtocol Support\u003c\/h3\u003e\n\u003cp\u003eDetects and tests a broad range of fast-charge protocols: \u003cstrong\u003ePD2.0, PD3.0, PD3.1, PPS, QC2.0, QC3.0, FCP, SCP, AFC, PE, DASH, VOOC and SuperVOOC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eThis is a measurement tool, not a power supply — it reports what passes through it and does not change or regulate it. Sold as a single meter.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49246823612633,"sku":"RC-ACC-PDMETER","price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/USB-CPDMeter.png?v=1789727110"},{"product_id":"usb-c-console-power-adapter-12cm","title":"USB-C to Console Power Adapter — 12 cm","description":"\u003cp\u003eA short pigtail adapter that turns the USB-C cables you already own into a retro console power lead. One end plugs into your console; the other is a USB-C socket — so the cable, and how long it is, is entirely your choice.\u003c\/p\u003e\n\u003ch3\u003eUse The USB-C Cables You Already Have\u003c\/h3\u003e\n\u003cp\u003eMost of us have a drawer full of USB-C leads. This adapter puts them to work: run any USB-C to USB-C cable from your charger into the adapter's socket, and the console is powered. No new cable to buy, and nothing extra to find room for.\u003c\/p\u003e\n\u003cp\u003eIt also leaves the length up to you — use whichever lead suits your arrangement, and swap it whenever your setup changes. The adapter simply stays on the console.\u003c\/p\u003e\n\u003cp\u003eUse a \u003cstrong\u003eUSB-C to USB-C\u003c\/strong\u003e cable: a USB-A to USB-C lead cannot negotiate Power Delivery, so it will not run the console. Prefer everything in one piece? Our \u003cstrong\u003eUSB-C Power Cable for Retro Consoles\u003c\/strong\u003e is a single 1.8 m lead in these same five versions.\u003c\/p\u003e\n\u003ch3\u003eWhich Version Do I Need?\u003c\/h3\u003e\n\u003cp\u003ePick by the connector your console takes. If you are powering several systems, add one of each — select a version, set the quantity, add it to your cart, then come back and choose the next.\u003c\/p\u003e\n\u003ch4\u003e5.5 × 2.1 mm, centre positive — 9 V\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNintendo:\u003c\/strong\u003e NES Frontloader \u003cem\u003e(NA\/USA)\u003c\/em\u003e, NES Toploader \u003cem\u003e(NA\/USA)\u003c\/em\u003e, Famicom, AV Famicom, Famicom Disk System, Super Famicom \u003cem\u003e(Japan)\u003c\/em\u003e, Super Famicom Jr. \u003cem\u003e(Japan)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSega:\u003c\/strong\u003e Master System, Genesis Model 1 \/ Mega Drive Model 1, Sega CD \u003cem\u003e(Model 1 and 2)\u003c\/em\u003e, Game Gear \u003cem\u003e(PAL and Japan)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEC:\u003c\/strong\u003e PC Engine, PC Engine CoreGrafx, PC Engine Shuttle, TurboGrafx-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtari:\u003c\/strong\u003e Jaguar, Jaguar CD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e4.75 × 1.7 mm, centre positive — 9 V\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSega:\u003c\/strong\u003e Mega Drive Model 2, Genesis Model 2, Genesis Model 3, 32X, Game Gear \u003cem\u003e(USA)\u003c\/em\u003e, Nomad, JVC X’eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEC:\u003c\/strong\u003e PC Engine Duo-R, PC Engine Duo-RX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSony:\u003c\/strong\u003e PS One \u003cem\u003e(the small redesign, SCPH-1xx)\u003c\/em\u003e, PlayStation 2 Slim \u003cem\u003e(SCPH-7xxxx)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNintendo GameCube — 12 V\u003c\/h4\u003e\n\u003cp\u003eFits DOL-001 and DOL-101.\u003c\/p\u003e\n\u003ch4\u003eNintendo Wii — 12 V\u003c\/h4\u003e\n\u003cp\u003ePowers the console itself; it is not a charger for controllers or accessories.\u003c\/p\u003e\n\u003ch4\u003eNintendo Wii U — 15 V\u003c\/h4\u003e\n\u003cp\u003ePowers the console itself. The GamePad has its own separate charger and is not covered by this adapter.\u003c\/p\u003e\n\u003ch3\u003eChoosing A Charger\u003c\/h3\u003e\n\u003cp\u003eEach version asks its charger for a different profile, and this is the specification to check before ordering. Total wattage on the box is not the measure — plenty of high-output chargers skip 12 V entirely, or offer it only at reduced current.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V versions:\u003c\/strong\u003e any USB-C PD charger offering a 9 V profile. All three of our chargers do, on their USB-C ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V versions:\u003c\/strong\u003e needs 12 V at 3 A. On the 200 W six-port charger that is \u003cstrong\u003ePD1\u003c\/strong\u003e only; the 270 W charger supplies it on \u003cstrong\u003eall four USB-C ports\u003c\/strong\u003e, and the 1000 W on \u003cstrong\u003eall eight\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 V version (Wii U):\u003c\/strong\u003e needs 15 V at 3 A. Use \u003cstrong\u003ePD1\u003c\/strong\u003e on the 200 W charger, or \u003cstrong\u003eUSB-C1, C2 or C3\u003c\/strong\u003e on the 270 W charger, or \u003cstrong\u003eany USB-C port\u003c\/strong\u003e on the 1000 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse your own USB-C cables\u003c\/strong\u003e — any USB-C to USB-C lead you already have on hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour choice of length\u003c\/strong\u003e — pair it with whatever cable suits your arrangement, and swap it any time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–12 cm pigtail\u003c\/strong\u003e — short enough to sit tidily behind the console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in LED indicator\u003c\/strong\u003e showing at a glance that power is connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulated output\u003c\/strong\u003e for consistent performance, without the voltage sag of a tired original adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive versions\u003c\/strong\u003e covering four console families\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravels light\u003c\/strong\u003e — far smaller than a period power brick, and it packs with cables you already carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eConsoles with a \u003cstrong\u003ebuilt-in mains power supply\u003c\/strong\u003e cannot use a DC adapter of any kind — that includes the original full-size PlayStation, the PlayStation 2 (Fat), the Saturn and the Dreamcast. For those we stock internal USB-C power supply boards instead.\u003c\/p\u003e\n\u003cp\u003eRegional versions sometimes differ in their power requirements — note that the Game Gear appears under two different versions depending on where it was sold. If your console is not listed, or you are unsure which revision you have, get in touch before ordering and we will check it with you. Neither a USB-C cable nor a charger is included.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"5.5 × 2.1 mm centre positive (9V)","offer_id":49248537575641,"sku":"RC-ADP-USBC-5521-9V","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"4.75 × 1.7 mm centre positive (9V)","offer_id":49248537608409,"sku":"RC-ADP-USBC-4717-9V","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo GameCube (12V)","offer_id":49248537641177,"sku":"RC-ADP-USBC-GC-12V","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo Wii (12V)","offer_id":49248537673945,"sku":"RC-ADP-USBC-WII-12V","price":12.0,"currency_code":"AUD","in_stock":true},{"title":"Nintendo Wii U (15V)","offer_id":49248537706713,"sku":"RC-ADP-USBC-WIIU-15V","price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/NESUSBCPigtail.png?v=1789726249"},{"product_id":"sony-playstation-2-fat-usb-c-power-supply-board","title":"Sony PlayStation 2 (Fat) USB-C Power Supply Board — 15V \/ 3A PSU Replacement","description":"\u003cp\u003eA modern replacement for the internal power supply in a PlayStation 2 Fat. The original module sits inside the console converting mains voltage, and after two decades of heat cycling it is a common cause of a PS2 that will not power on, or that becomes unreliable once it has been running a while. This board replaces it and runs the console from a USB-C Power Delivery charger instead.\u003c\/p\u003e\n\u003cp\u003ePower delivery has come a long way since these machines were engineered. A USB-C PD supply is smaller, cooler and far better regulated than anything available when the console was new — and when it eventually needs replacing, it is an off-the-shelf part rather than a hunt for a decades-old brick.\u003c\/p\u003e\n\u003ch3\u003eFits The Fat PS2 — Not The Slim\u003c\/h3\u003e\n\u003cp\u003eThis board is made for the original full-size \u003cstrong\u003ePlayStation 2 (Fat)\u003c\/strong\u003e, the model with the power supply built in and a mains lead going straight into the back. The later \u003cstrong\u003ePS2 Slim\u003c\/strong\u003e uses an external power adapter instead, so this is not the part for that console — for a Slim, our USB-C power cable covers it with the 4.75 × 1.7 mm version.\u003c\/p\u003e\n\u003ch3\u003eRequires A USB-C PD Charger\u003c\/h3\u003e\n\u003cp\u003eThe board draws \u003cstrong\u003e15 V at 3 A\u003c\/strong\u003e over USB-C Power Delivery, and a charger that cannot supply that exact profile will not run the console — total wattage on the box is not the measure. On our 200 W six-port charger use \u003cstrong\u003ePD1\u003c\/strong\u003e; on the 270 W use \u003cstrong\u003eUSB-C1, C2 or C3\u003c\/strong\u003e (C4 tops out at 15 V \/ 2 A). On the 1000 W, \u003cstrong\u003eany USB-C port\u003c\/strong\u003e will do. Not sure what your charger can do? Our USB-C PD power meter reads the real figures back, port by port.\u003c\/p\u003e\n\u003ch3\u003eWhy Replace The Original Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, regulated output\u003c\/strong\u003e — a consistent supply without the voltage sag behind crashes and spontaneous resets on a tired PSU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns cooler\u003c\/strong\u003e than the original supply, removing a real heat source from inside the console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern, replaceable power source\u003c\/strong\u003e — power comes from a standard USB-C charger you can replace off the shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes the mains-side components out\u003c\/strong\u003e of the console entirely\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality capacitors\u003c\/strong\u003e for consistent output and a long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 15 V \/ 3 A DC, regulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e USB-C Power Delivery (PD 3.0), 15 V \/ 3 A required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e PlayStation 2 Fat, in place of the internal power supply module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e pure DC — the USB-C port is a power input, not a data or charging port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThis is an internal replacement, so fitting it means opening the console and removing the original power module. It is a straightforward swap for anyone comfortable working inside a retro console, and no modification to the motherboard is required.\u003c\/p\u003e\n\u003cdiv class=\"rc-callout\"\u003e\n\u003cspan class=\"rc-callout__title\"\u003ePrefer it fitted for you?\u003c\/span\u003e\n\u003cp\u003eRetro Craft can install this board for you. Send your console to us from anywhere in Australia, or drop it in if you are local to Perth, and it comes back tested and ready to play. \u003ca href=\"\/pages\/contact\"\u003eGet in touch\u003c\/a\u003e before ordering and we will sort out the details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne power supply board. A USB-C charger and cable are not included — see Power Solutions and Adapters for units that supply what this board needs.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49258762961113,"sku":"RC-PSU-PS2FAT","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/PS2USBCPSU1.png?v=1789572240"},{"product_id":"1000w-8c-2a-port-gan-usb-c-charger","title":"1000W 8C+2A Port GaN USB-C Charger","description":"\u003cp\u003eA desktop power station for the whole collection. Eight USB-C Power Delivery ports, two USB-A ports and up to 1000 W of total output mean one charger can run an entire shelf of USB-C-converted consoles — replacing a power board full of bricks with a single tidy unit.\u003c\/p\u003e\n\u003ch3\u003eConsole Compatibility\u003c\/h3\u003e\n\u003cp\u003eEvery console power product we stock needs one of three USB-C PD profiles. Here is where this charger supplies each one:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V\u003c\/strong\u003e — the 9 V cable and adapter versions: \u003cstrong\u003eall eight USB-C ports\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V \/ 3 A\u003c\/strong\u003e — the GameCube and Wii versions, the Saturn, Dreamcast, PlayStation 1 and GameCube boards, and the N64 Pow: \u003cstrong\u003eall eight USB-C ports\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 V \/ 3 A\u003c\/strong\u003e — the Wii U version and the PlayStation 2 board: \u003cstrong\u003eall eight USB-C ports\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A ports\u003c\/strong\u003e — A1 and A2 top out at 12 V \/ 1.67 A, for accessories and lighting, not for USB-C PD console adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e every USB-C port suits every adapter we stock, so there is no port planning at all.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000 W total output\u003c\/strong\u003e across ten ports\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTen ports — eight USB-C PD plus two USB-A\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e12 V \/ 3 A and 15 V \/ 3 A on every USB-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 140 W\u003c\/strong\u003e from each of USB-C1 to C4 (USB PD 3.1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGaN semiconductor technology\u003c\/strong\u003e — higher efficiency, less heat and a smaller body than a conventional charger of the same output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAustralian plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpright stand included\u003c\/strong\u003e to save desk space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOutput Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C1 to C4:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/5A · 28V\/5A · PPS 3.3–21V\/5A — 140 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C5 to C8:\u003c\/strong\u003e 5V\/3A · 9V\/3A · \u003cstrong\u003e12V\/3A\u003c\/strong\u003e · \u003cstrong\u003e15V\/3A\u003c\/strong\u003e · 20V\/5A · PPS 3.3–21V\/5A — 100 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A1 \/ USB-A2:\u003c\/strong\u003e 5V\/3A · 9V\/2.22A · 12V\/1.67A — 20 W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal output:\u003c\/strong\u003e up to 1000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy GaN?\u003c\/h3\u003e\n\u003cp\u003eGallium nitride switches far more efficiently than the silicon used in older chargers, so it wastes less energy as heat. That efficiency is what makes this much output possible from a compact unit — and it keeps the charger cool while it works.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cp\u003eThe headline 1000 W is the peak capability; with several ports in use the combined output is shared between them. Every console power adapter has its own voltage and current requirement — check that yours is met by the port you plug it into. Not sure what a port can deliver? Our USB-C PD power meter reads the real figures back. Sold as a single charger; USB-C cables are not included.\u003c\/p\u003e","brand":"Retro Craft","offers":[{"title":"Default Title","offer_id":49273081102553,"sku":"RC-CHG-1000W","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3322\/8505\/files\/1000wcharger.png?v=1789728066"}],"url":"https:\/\/retrocraft.co\/collections\/power-solutions-and-adapters-consoles.oembed","provider":"Retro Craft","version":"1.0","type":"link"}